RPM Can-Am X3 High Flow Carbon Intake Kit

Can-Am X3 High Flow Carbon Intake Kit

The X3 platform's absolute best performing, highest flowing, and least restrictive intake system! Methodically engineered in-house, the RPM SXS Carbon Fiber Intake System delivers maximum airflow at drastically higher air speeds, capable of flowing well in excess of 500+ HP.

Built to absolute perfection from twill-weave carbon fiber with completely smooth internal transitions through the entire runner length, this intake features a massive 3.75" inlet paired to our port-matched silicone for undisrupted intake velocity directly into the turbo. The kit includes two silicone couplers—one for stock turbos and a second 60mm coupler for high-output aftermarket turbos. The intake tube isolates cleanly into the factory intake system using the supplied isolator, fits neatly under the factory plastic cover, and pairs with an industry-leading S&B Dry Extendable Filter and RPM Hydrophobic Pre-Filter to repel water, sand, and dust. Complete with clutch intake filtration trim to protect your CVT system, this is the ultimate intake upgrade for everything from trail rigs to aggressive dune and drag cars.

Features:

• 500+ HP Flow Capacity: Massive 3.75" twill-weave carbon fiber tube engineered for maximum air volume and drastically higher intake velocity.

• Faster Turbo Spool: Smooth-bore internal transitions eliminate air turbulence for instant throttle response and faster boost buildup.

• Includes Stock & Aftermarket Couplers: Comes with both a factory-size turbo coupler and a 60mm OD coupler for big-turbo setups.

• Premium S&B Dry Filter & RPM Pre-Filter: Features an S&B dry extendable filter paired with a hydrophobic pre-filter to block sand, dust, and water while extending service intervals.

• Clutch Intake Protection: Includes dedicated clutch intake filtration trim to protect your CVT system from harmful dirt and debris.

• Stealthy Factory Integration: Fits under the factory intake cover and utilizes stock clutch hoses for a clean, OEM-plus engine bay.

• Complete Turn-Key Hardware Pack: Includes mounting isolators, heavy-duty stainless clamps, hardware, and an airbox modification jig template.

What's Included in the Kit:

• (1) RPM SXS 3.75" Twill-Weave Carbon Fiber Intake Tube

• (1) S&B Dry Extendable Air Filter

• (1) RPM Hydrophobic Water/Dust Pre-Filter Sleeve

• (1) Stock Turbo Port-Matched Silicone Coupler

• (1) 60mm Big-Turbo Port-Matched Silicone Coupler

• (1) Clutch Intake Filtration Trim Kit

• (1) Airbox Modification Jig Template

• Complete Isolator, Stainless Clamp & Installation Pack

Fitment:

• Can-Am Maverick X3 (Fits All Years, Models, and Variations — Except XMR Models)

Technical Notes & Requirements:

• Catch Can Required: Requires the use of an aftermarket crankcase catch can system. Grab your RPM Catch Can Here!

• Airbox Modification: Requires enlarging the factory airbox hole to 4.25". An RPM jig template is included to make drilling fast and accurate using a standard 4.25" hole saw bit (not included). Grab one here!

Compatibility

This part is compatible with 44 vehicle(s)